Faucet leak repair begins with knowing what kind of faucet you have and the most common reasons why they fail in the first place. Weâ€™ve all been thereâ€¦ in the middle of night listening to the drip-drip-drip of a leaky faucet tapping in the sink. Itâ€™s more than just something that drives you up the wall. It can shoot your water bill up, which is something no one needs these days. Plus, left untreated, you could end up with corroded sink bowls and fixtures.
Before you even begin thinking about getting into faucet leak repair fixing your leaky faucet, you will need to know what kind of faucet you have and the different parts that commonly go wrong in each one. Faucets generally come in one of four basic types: cartridge, compression, ball and disc. It isnâ€™t as difficult as it sounds to know what kind of faucet you are dealing with, though.
Many newer homes have a single handle that lets you control the cold and hot water. If you have this kind of faucet, then you have either a disc, ball, or cartridge faucet on your hands. If you have the traditional faucet that has two handles, one for the cold water and one for the hot, then you probably have a compression faucet. Two-handle faucets can also sometimes be a disc faucet too.
A leaky faucet is usually due to seals, o-rings, and washers that need replaced. If your seals or washers need replaced, you can count on your faucet dripping. If your faucet is leaking around the handle, you can usually handle this faucet leak repair by simply removing the handle. Check the o-rings that are found on the stem and see if theyâ€™re worn. You can also try tightening or adjusting the packing nut and adjusting ring to see if that solves the problem.
On a compression faucet, the seals and washers are constantly being pressured into the metal valve seats. For this reason, these faucets are bound to start dripping at one point or another. These washers arenâ€™t found in the cartridge, ball and disc faucets. They are much more likely to drip from the base of the faucet than from the spout.
The worst thing you can do if you need to repair a leaky faucet is to ignore it (this will only make a future faucet leak repair more costly). The second worst thing to do is to keep trying to tighten down the faucet, as youâ€™re likely to torque it too much and permanently damage the faucet. If you canâ€™t seem to find the parts that need replacing, then you may need to get some help from a professional. You can contact your local Salt Lake City Plumber.